Biome is working on a Bangalore Sustainability Forum (BSF) funded project to identify and revive dead zones in Jakkur lake. Dead zones are low oxygen areas in oceans and lakes that occur due to eutrophication (presence of excess nutrients such as phosphorus and nitrogen). It often negatively impacts aquatic life, since most plants and organisms require oxygen to survive.
A way to identify a dead zone is to measure dissolved oxygen (DO). DO levels of 4mg/L and above generally indicate a healthy aquatic life and DO levels less than 4mg/L indicate poor water quality and is considered detrimental to aquatic life. To test DO levels we will be using a YSI Pro20 Dissolved Oxygen handheld meter. The cost of the meter was approximately Rs 70,000 and it was purchased from Xylem Analytics, a dealer for YSI instruments in India. A picture of the DO sensor is shown below in Image 1.
We started the project in August 2019 and monitored the DO in the lake on a regular basis. We identified three dead zone areas: two near the wetland and the other in the kalyani. We will be trying different methods such as aerators and floating wetlands to revive one of the dead zones.
This is an ongoing project, which will be updated once the project is completed.
A way to identify a dead zone is to measure dissolved oxygen (DO). DO levels of 4mg/L and above generally indicate a healthy aquatic life and DO levels less than 4mg/L indicate poor water quality and is considered detrimental to aquatic life. To test DO levels we will be using a YSI Pro20 Dissolved Oxygen handheld meter. The cost of the meter was approximately Rs 70,000 and it was purchased from Xylem Analytics, a dealer for YSI instruments in India. A picture of the DO sensor is shown below in Image 1.
 |
| Image 1: YSI Pro20 Dissolved Oxygen Handheld Meter |
We started the project in August 2019 and monitored the DO in the lake on a regular basis. We identified three dead zone areas: two near the wetland and the other in the kalyani. We will be trying different methods such as aerators and floating wetlands to revive one of the dead zones.
This is an ongoing project, which will be updated once the project is completed.
We offer TankPro series Submersible Level Sensor is designed for continuous level measurement of aggressive liquid media diameter making it ideal for level monitoring in well and borehole applications. Manufactured for years of trouble free service, the sensor has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featured of the sensor is a precision of +/- 0.5% accuracy F.S. Lightning and surge protection is included standard to stand up in harsh applications.
ReplyDelete